Baldor – IDCSWDM3710T
Additional Information
ManufacturerBaldorNameplate Output0.75Number of Poles4Phase3MultiplierWDShaft Diameter (In.)4.25Speed 1790 RPMProduct Style GRINDERWheel Bore Size (In.)0.75Wheel Diameter(In.)8Wheel Face(.)1Starting Method Direct on lineFrame 213TCOutput @ Frequency 7.500 HP @ 60 HZSynchronous Speed @ Frequency 1800 RPM @ 60 HZVoltage @ Frequency 230.0 V @ 60 HZFrame Material Stainless SteelMotor Letter Type Three PhaseCatalog Number IDCSWDM3710TEnclosure TEFCXP Division Not ApplicableAgency Approvals CCSA USArmature Voltage 230 VBase Speed 1750 RPMField Voltage 230 VOutput Power 40.000 KWAmbient Temperature 40 °CArmature Current 174.0 aBase Indicator RigidBearing Grease Type Polyrex EM (-20F +300F)Drip Cover No Drip CoverDuty Rating CONTFeedback Device NO FEEDBACKField Winding Type COMPOUNDFrame Prefix FLHeater Indicator No HeaterInsulation Class HLifting Lugs No Lifting LugsMounting Arrangement F3Overall Length 78.57 INService Factor 1.00Shaft Extension Location Pulley EndShaft Ground Indicator Shaft GroundingShaft Slinger Indicator No SlingerMotor Standards NEMAAuxillary Box No Auxillary BoxConstant Torque Speed Range 6-60Current @ Voltage 479.000 A @ 460.0 VDesign Code LEfficiency @ 100% Load 84.0 %Enclosure Modification 841High Voltage Full Load Amps 479.0 aInverter Code Not InverterKVA Code KMotor Lead Quantity/Wire Size 2 @ 16 AWG, A PHMotor Type 3540LCPower Factor 93Product Family General IndustrialPulley End Bearing Type BallPulley Face Code StandardShaft Rotation ReversibleSpeed Code Single SpeedThermal Device – Winding Normally Closed ThermostatXP Temp Code T2CMax Speed 2700 RPMElectrically Isolated Bearing Not Electrically IsolatedFront Face Code Terminal PanelLocked Bearing Indicator No Locked BearingMotor Lead Exit Terminal PanelMotor Lead Termination Flying Leads With QCPulley Shaft Indicator StandardRoHS Status ROHS COMPLIANTVibration Sensor Indicator No Vibration SensorWinding Thermal 1 Automatic Thermal OverloadWinding Thermal 1 Location ES
