Description
This is a very robust and economical linear gauge with a reference Point that
offers you the following benefits:
- The advanced construction of the plunger guidance assembly makes it very resistant to external shocks and vibration.
- Its differential square-wave signal output allows you to use it for a wide range of applications.
- It is very long lasting due to linear ball-bearings in the spindle unit.
- The origin point mark on its scale gives you a reference point.
Specification
| Range: | 0 – 10 |
| Accuracy: | (1,5 + L/50) ?m L=measured length in mm |
| Measuring force: | 1.2 N with spindle down, 1.1 N spindle horizontal, 1 N spindle upwards |
| Scale: | Photoelectric linear encoder |
| Stem ?: | 8 mm |
| Max. response speed: | 1500 mm/s |
| Contact point: | ?3 mm carbide ball, thread: M 2.5 x 0.45 |
| Signal pitch: | 4 |
| Cable length: | 2 |
| Power supply: | 5 V (4.8 V to 5.2 V), 120 mA max. |
| Output signal: | 90? phase difference, differential square wave (RS-422A equivalent), minimum edge distance 200 ns (1 ?m type), 250 ns (0.5 ?m type) |
| Environmental conditions: | 0 ?C to 40 ?C (20 % to 80 % rel. humidity, no condensation) ?C |
| Bearing type: | Linear ball bearing |
| Scale reference point: | 3 mm from lowest rest point (10 mm type) 5 mm from lowest rest point (25.5 mm type) |
| Mass: | 260 |
